User's Manual

91
Figure 6-22 Sample Copy by Input Screen
Tap Copy by Input, an input box pops up for you to enter the ID of the
original sensor. Tap the input box to open a soft keyboard, enter the ID and
tap Enter when finished.
Some sensor manufacture use hex format to compile the sensor ID, others
use decimal format. The input box will automatically recognize the character
length of the ID of an original sensor. Once the length of the entered ID
reaches the limit of the original sensor ID, a warning message pops up.
By using Copy by Input, the ID you input is the ID of the original sensor
which has already been saved in the TPMS ECU, so there is no need for
Relearn.
Auto Create
The Auto Create function is used to automatically create random a sensor
ID to program a new MX-Sensor.
To use this function, there is no need to activate the original sensor or
retrieve the original sensor IDs from the TPMS ECU.
After select the vehicle model, select one sensor position and place a
MX-Sensor near the TPMS antenna of the tablet (the top right corner), and
then tap Auto Create to program the new MX-Sensor.