User's Manual

83
If the OBD function is supported by the test vehicle, the sensor ID saved in
the TPMS ECU will be retrieved and displayed on the screen with an OBD
mark before it when the communication completed.
If the sensor ID retrieved from sensor activation is the same as the ID saved
in the ECU, the trigger mark ( ) and OBD mark ( ) before the IDs will
turn to green and that is the normal condition.
If the IDs are different, the marks will become red ( and ). In this case,
the vehicle ECU cannot recognize the sensor installed on the vehicle.
If the OBD function is supported by the test vehicle, the sensor ID saved in
the TPMS ECU cannot be retrieved and only the sensor ID retrieved from
sensor activation will appear on the screen with a triggering mark before it.
Figure 6-11 Sample Diagnosis Screen 2
Details
If there are DTCs existed in the TPMS ECU, a yellow warning mark appears
in the DTC column and the details button is available.
Tap details in the DTC column to view the detailed information of the DTCs.