User's Manual

79
Top Toolbar Buttons
The top toolbar contains a number of buttons that allow you to print or save
the displayed data and make other controls. See Table 4-1 Top Toolbar
Buttons on page 21 for details.
Navigation Tab
The navigation tab at the top of the Main Section screen contains the
following items:
1. Check Tab – displays the triggered sensor data
2. Diagnosis Tab – displays the sensor IDs and DTCs saved in the TPMS
ECU
3. Programming Tab – displays the triggered/retrieved sensor IDs and
new programmed sensor IDs
4. Relearn Tab – displays the sensor Relearn procedure of the selected
vehicle model
The information of the test vehicle is displayed to the left of the four tabs and
the VCI connection status and the battery level of the test vehicle are
displayed to the right of the four tabs.
NOTE
Not all vehicles support Diagnosis function. If the selected vehicle model
does not support Diagnosis, this tab will not appear on the screen.
Main Section
The main section of the screen varies depending on the stage of operations.
The main section can show the TPMS sensor conditions, such as sensor ID,
pressure, temperature and battery status, and the specific relearn
procedures.
Functional Buttons
The displayed functional buttons at this section of the screen varies
depending on the stage of operations. They can be used to trigger the
TPMS sensor, create sensor IDs, program MX-Sensor, return to the
previous screen or exit the function.