User's Manual

66
[1] Enter New Value for Adjustment
From the Starting Basic Inspection Quantity menu, tap [1] and the screen
displays as below.
Figure 5-23 Sample Enter New Value Screen
After entering the value, tap OK to save the value to the tool. Tap ESC to exit
the operation.
NOTE
The data you input should be in the range given. If the input data is out of
range, the tool will display a warning message “Permissible adjustment
range exceeded.”
[2] Reset Adjustment to 0
Once the [2] is tapped, the tool will automatically reset the value to zero.
[3]/[4] Store Data and Exit
When the fuel delivery rate adjustment is completed, tap [3] to store the new
value in the control units; or select [4] and OK to retain the old value.
Injection Rate
This function is used to adjust the injection volume.
1. Tap Injection Rate from the service functions menu to enter the service
screen.