User's Manual

52
 Ensure that the EPB control system is reactivated after the maintenance
work has been completed.
NOTE
Autel accepts no responsibility for any accident or injury arising from the
maintenance of the Electronic Parking Brake system.
 To perform EPB functions
1. Tap the Service application button from the MaxiCheck Job Menu.
2. Tap EPB button and wait for the vehicle manufacturer screen. You
can tap VIN Scan or the vehicle make to acquire vehicle VIN
information and tap Yes to confirm. See Vehicle Identification on
page 21 for detail.
3. Tap the service you want in the EPB function list, the list may vary
for different vehicles being tested.
Figure 5-5 Sample EPB Function List
4. Follow the step-by-step on-screen instruction to complete the
service.
5. Press OK button to exit.
EMF Start-up
This service function would start up the parking brake, it must be conducted
after the following repairs:
 Replacing an EMF control unit.