User's Manual

29
the current screen.
3. A temporary file will be created and send to the computer for
printing.
4. When the file is transferred successfully, a confirmation message
displays.
 To submit Data Logging reports in Diagnostics
1. Tap the Diagnostics application button from the MaxiCheck Job
Menu. The Data Logging button on the diagnostic toolbar is
available throughout the whole Diagnostics operations.
2. Tap the Data Logging button. The button displays blue during the
active recording process.
3. Tap the Data Logging button again to end recording. A submission
form will display to let you fill in the report information.
4. Tap the Send button to submit the report form via the Internet, a
confirmation message displays when sending is successful.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the
following items:
1. Menu Title – indicates the menu subject of the Main Section.
2. Voltage Icon – indicates the voltage status of the vehicle.
Main Section
The Main Section of the screen varies depending on the stage of operations.
The Main Section can show vehicle identification selections, the main menu,
test data, messages, instructions and other diagnostic information.
Functional Buttons
The displayed Functional Buttons at this section of the screen varies
depending on the stage of operations. They can be used to navigate, save
or clear the diagnostic data, exit scanning as well as make other functional
controls. The functions of these buttons will be introduced respectively in
the following sections of the corresponding test operations.