User's Manual

117
to open an information screen to view more details, and tap the dim
area around to close the window.
 Right Column – according to the operation status of each software
item, the button displays differently.
a) Tap Update to update the selected item.
b) Tap Pause to suspend the updating procedure.
c) Tap Continue to go on updating the suspended update.
 To update the diagnostic software and TPMS service software
1. Make sure the Display Tablet is connected to a power source with
stable access to the internet.
2. Tap the Update application button from the MaxiCheck Job Menu;
or tap the update notification message when received one; or tap
the Update icon on Vehicle Menu in Diagnostics application. The
Update application screen displays.
3. Check all available updates:
 If you decide to update all the items of diagnostic software,
select Diagnostics Tab and then tap the Update All button; if
you want to update all items of TPMS service software, select
TPMS Tab and then tap the Update All button.
 If you only want to update one or some of the item(s), tap the
Update button on the right column of the specific item(s).
4. Tap the Pause button to suspend the updating process. When you
tap Continue to renew the update, the updating process will
resume from the break point.
5. When the updating process is completed, the firmware will be
installed automatically. The previous version will be replaced.
Firmware Update
There is no separate update button for firmware update of the Display
Tablet, the firmware update package will be downloaded together with the
software package. If a new software package is downloaded and installed,
when you click any vehicle manufacturer buttons in the TPMS service menu,
a message will pop up to remind you install the firmware update.