User's Manual

33
NOTE
The Color/Gray mode only applies for the two cameras on the cable, not for
the rear camera on the display tablet. It would not work in rear camera mode.
Color is the default mode.
Date and Time
This option allows you to adjust the date and time for the MV500-1 system.
 To adjust the Date and Time setting
1. Tap the Settings icon on the live image screen.
2. Tap the Date and Time option on the column.
3. To set date and time automatically, tap the box on the right of Set
Automatically, a tick will show afterwards. Please be noted that
connection to the Internet is necessary for this option, otherwise a
message “Please connect to the Internet to set date and time
automatically” will pop up, tap OK to go to Wi-Fi setting or tap
Cancel to quit this option.
4. To set date and time manually, roll up and down the digital bars for
date and time. Please be noted that this option is only available
when Set Automatically is not chosen, otherwise the digital bars
would be locked and unable to be rolled.
5. Tap Save to confirm and return to Settings menu.
Figure 6-4 Sample Date and Time Setting