User's Manual

45
Troubleshooting
Table 7-1 Troubleshooting
Symptoms
Possible
Reason
Solutions
Display is on, but does not show
image.
Cable
connection is
loose.
Check and
reattach.
Imager heads
are covered by
debris.
Check if it is
covered by debris
and remove it.
LED on imager heads are dim at
max brightness, display tablet
changes between monochrome
and color mode, and then turns
itself OFF after a short period.
Low battery.
Charge battery.
The tool cannot turn on.
Dead battery.
Replace battery.