User's Manual

ii
Safety Instructions
To prevent personal injury or damage to vehicles and/or the scan tool, read
this instruction manual first and observe the following safety precautions at a
minimum whenever working on a vehicle.
Work Area Safety
 Always perform automotive testing in a safe environment.
 Keep your work area clean and well lit. Cluttered benches and dark areas
may cause accidents.
 Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
 Operate the tool in a well-ventilated work area.
 Do not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or heavy dust.
 Keep a fire extinguisher suitable for gasoline/chemical/electrical fires
nearby.
 Do not use the tool around corrosive chemicals which can ruin the photo
quality.
 Keep bystanders, children and visitors away while operating the tool.
 Keep the tools dry, clean, free from oil, water and grease. Use a mild
detergent on a clean cloth to clean the outside of the tool when
necessary.
Electrical Safety
 Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
 Do not expose the tool to rain or wet conditions. Water entering the tool
will increase electric risk.
 Do not abuse the cord. Never use the cord for carrying, pulling, or
unplugging the tool. Keep cord away from heat, oil, sharp edges or
moving parts.