User's Manual

17
Battery Charging Procedures
has two 3.7 V built-in lithium-ion rechargeable batteries, a 3200
mAh lithium-ion battery for the display tablet and a 2600 mAh lithium-ion
battery for the handle. When the battery level is below 15% and the tool is
not charging, the corresponding Battery Capacity icon on the top of the
display tablet screen will be red until the tool shut down automatically.
For both of the batteries, they can only be charged by charger:
 To charge by charger:
 Locate the DC power source port of the tool.
 With dry hands, connect the tool to the outlet with charger to start
charging.
NOTE
New batteries reach full capacity after approximately 3 to 5 charging and
discharging cycles.
The device