User's Manual

Diagnostics Operations Service
43
4.7 Service
The Service section is specially designed to provide you quick access to the
vehicle systems for various scheduled service and maintenance performances.
The typical service operation screen is a s eries of menu driven executive
commands. By following the on-screen instructions to select appropriate
execution options, enter correct values or data, and perform necessary
actions, the system will guide you through the complete performance for
various service operations.
The most commonly performed service functions include:
 Oil Reset Service
 TPMS Programming Service
 EPB Service
 ABS/SRS Services
 SAS Calibration Service
 DPF Regeneration Service
4.7.1 Function Descriptions
This section describes the main functions for vehicle service:
Oil Reset Service
This function allows you to perform reset for the Engine Oil Life system, which
calculates an optimal oil life change interval depend on the vehicle driving
conditions and climate. The Oil Life Reminder must be reset every time the oil
is changed, so the system can calculate when the next oil change is required.
Tire Pressure Monitor System (TPMS) Service
This function allows you to quickly look up the tire sensor IDs from the
vehicle’s ECU, as well as to perform TPMS programming and reset
procedures after tire sensors are replaced.
Electric Parking Brake (EPB) Service
This function has a multitude of usages to maintain the electronic braking
system safely and effectively. The applications include deactivating and
activating the brake control system, assisting with brake fluid control, opening
and closing brake pads, and setting brakes after disc or pad replacement, etc.