User's Manual

Diagnostics Operations Diagnosis
33
Figure 4-9 Sample Read Codes Screen
1. Diagnostics Toolbar Buttons – see Table 4-2 Diagnostics Toolbar
Buttons on page 23 for detailed descriptions of the operations for each
button.
2. Main Section
 Code Column – displays the retrieved codes from the vehicle.
 Status Column – indicates the status of the retrieved codes.
 Description Column – detailed descriptions for the retrieved codes.
 Snowflake Icon – only displays when freeze frame data is available
for viewing; Selecting displays a data screen, which looks very
similar to the Read Codes interface, therefore same operation
method may be applied.
3. Functional Button – in this case, only a Back (or sometimes an ESC)
button is available; tap it to return to the previous screen or exit the
function.
4.6.3 Erase Codes
After reading the retrieved codes from the vehicle and certain repairs have
been carried out, you can decide to erase the codes from the vehicle using
this function. Before performing this function, make sure the vehicle’s ignition
key is in the ON (RUN) position with the engine off.