User's Manual

78
Notification Center
This option allows you to turn the Notification Center function on or off. The Notification
Center function configures the MaxiSys tablet to receive regular on-line messages from
the server for system update notifications or other service information via the Internet. It
is highly recommended to keep this function on all the time, so you won’t miss out any
new update for MaxiSys or event from Autel. Internet access is required for receiving
on-line messages.
 To enable the Notification Center function
1. Tap Settings on the MaxiSys Job Menu.
2. Tap Notification Center on the left column.
3. Tap ON/OFF to enable or disable the Notifications function. If the function is
enabled the button turns blue, or if disabled the button turns gray.
4. Tap Home on the top left corner to return to the MaxiSys Job Menu. Or select
another setting option for the system setup.
When the Notification Center function is turned on, and new messages are received by
the MaxiSys device, a notification message displays on the MaxiSys Job Menu. Press
on the message bar and drag it down, and the received messages are shown in the list,
slide the list up or down to view all if the message list covers more than one screen.
Tap a specific message to launch the corresponding application. For example, if you
tap on an Update notification message, the Update application will be launched.
Multitask
The Multitask option allows you to turn Multitask function on or off. The Multitask
feature enables you to browse and navigate more freely among different applications
on the MaxiSys system. By simple tapping the Multi Task button, the Multi Task menu
displays all bookmarks of the active applications; you can switch from one app to
another in just 1 second.
 To enable the Multitask function
1. Tap Settings on the MaxiSys Job Menu.
2. Tap Multitask on the left column.
3. Tap ON/OFF to enable or disable the Multitask function. If the function is
enabled the button turns blue, or if disabled the button turns gray.
4. Tap Home on the top left corner to return to the MaxiSys Job Menu. Or select
another setting option for the system setup.