User's Manual

Diagnostics Operations Diagnosis
a) Trigger Type – sets the trigger mode for data recording, mainly
of two kinds: Manual and Auto. There are four options
available:
1) Manual – allows you to manually start and stop data
recording
2) DTC – auto triggers data recording when any DTC is
detected
3) DTC Check Mode – auto triggers data recording when
certain pre-selected DTC types are detected
4) Parameter – auto triggers data recording when any
parameter value reaches the preset threshold
b) Duration – sets the recording time (for Auto trigger mode only)
c) Trigger Point – reserves a relative percentage of a record
length before the data recording start point for reference (for
Auto trigger mode only)
 To perform setting for live data record
1. Tap the Setting functional button at the bottom of the Live Data
screen.
2. Tap the Record navigation button.
3. Tap the
A
○
>E A button on the right of Trigger Type bar and select
the required trigger mode.
4. Tap the
A
○
>E A button on the right of Duration bar and select a
length of time.
5. Tap the
A
○
>E A button on the right of Trigger Point bar and select
a relative percentage of a record length to be reserved before
the data recording start point.
6. Tap Done to save the setting and return to the Live Data
screen; or tap Cancel to cancel without saving and exit Setting.
 Done Button - confirms and saves the setting, and returns you to
the Live Data screen.
 Cancel Button – cancel the setting operation, and returns you to
the Live Data screen.
49