User's Manual

VCI Manager Operations Bluetooth Pairing
NOTE: If you are not sure about the specific IP address values, please
contact your network administrator.
9. Tap Apply to set up the wired network connection.
10. Tap the Back button on the top left to return to the MaxiSys Job
Menu.
When the wired network is successful connected, the connection status is
displayed as Connected, and the two status lights at the corners alongside the
Ethernet Ports on the display tablet illuminate. The solid amber light indicates
steady connection, and the flashing green light indicates active
communication, between the units. The VCI navigation button at the bottom
bar shall display a green tick icon after a few seconds, indicating the MaxiSys
Elite diagnostic platform is ready to perform vehicle diagnosis.
10.3 Update
Before updating the VCI software, please make sure the MaxiSys tablet
network connection is stable.
 To update the VCI device software
1. Power on the MaxiSys display tablet.
2. Connect the VCI device to MaxiSys tablet via USB.
3. Tap the VCI Manager application on the MaxiSys Job Menu of the
display tablet.
4. Select Update from the connection mode list.
5. The current version number and the latest version number of the
VCI software will be displayed after a few seconds, click Update
Now to update the VCI software if available.
96