User's Manual

The table below describes the respective aircraft

movements reacting to the movements of the command

sticks.

Table 4-7

Controls of the Command Sticks

Command Stick Movement Aircraft Movement

Throttle Up/Down Ascend/Descend

Rudder Left/Right Yaw Left/Right

Elevator Up/Down Forward/Backward

Aileron Left/Right Left/Right

2) Command Sticks Calibration

There are 4 channels in total for command sticks

calibration. They are A, E, T and R channels,

representing Aileron, Elevator, Throttle and Rudder

respectively. Before calibration, make sure your

desired transmitter mode has been selected.

To calibrate the command sticks:

1. Turn on the remote controller and then the aircraft.

2. Connect your mobile device to the X-Star Wi-Fi

Network.

3. Launch the X-Star App on your mobile device.

4. Tap the

Configuration

icon on the main menu.

5. Tap the

Remote Controller

option.

6. Select your preferred transmitter mode and

familiarize yourself with the controls of the sticks.

7. Rotate the sticks in a circular pattern by their

maximum ranges several times and then back to the

middle position. You can do both sticks at a time or

one at a time.