User's Manual

To edit the waypoints:

1. Tap the desired waypoint number at the bottom of

the screen.

2. Adjust the waypoint altitude and hover time as

demanded.

3. Tap

to complete the waypoint setting.

To start the flight mission:

1. Tap the

Back

button to return to the Ground Station

Control Panel after completing the waypoint flight

plan setting.

2. Tap

on the Control Panel to start the flight

mission.

To terminate the waypoint mission:

There are two ways to terminate the waypoint mission:

1) Regain control of the aircraft by pushing the Flight

Mode Switch on the remote controller to

ATTI

position. The aircraft will abort the mission and

respond to the navigation by the remote controller.

2) Tap the

Go Home

button to activate the Go Home

procedure. The aircraft will terminate the mission

and return to the home point and land automatically.

To land the aircraft:

When the flight mission has been completed, the

aircraft will return to the home point (i.e. take-off point)

automatically and hover.

There are 2 ways to land the aircraft:

1) Regain control of the aircraft using the remote

controller to land the aircraft manually or by using

the 1-click

Landing

button

2) Tap the

Landing

button on the Ground Station

Control Panel.