User's Manual

33
¾ To power up the remote controller
NOTE:
It is recommended to power up the remote controller
before turning on the aircraft.
1. Adjust the remote controller power output by twisting the
CE/FCC Control Screw using a Philips screwdriver. Turn the
screw clockwise for a full turn to set as CE compliant; or turn
the screw counter-clockwise for a full turn to set as FCC
compliant.
2. Press and hold the Power Button for 3 seconds until the
Power Button lights up in solid green. At the same time, 2
brief buzz sounds can be heard if the remote controller is set
as CE compliant, whereas 3 brief buzz sounds can be heard
when set as FCC compliant.
3. Turn on the WiFi switch at the rear side of the remote
controller. The remote controller retrieves flight data while
communicating with the aircraft and the indicator lights will
light up indicating various aircraft and connection status.
3.2.1 Re-pairing Remote Controller
The Remote Controller and the aircraft are paired by default, this
enables the devices to pair up automatically when both powered
up.
Re-pairing between the aircraft and the Remote Controller may be
required when one of the devices has been replaced. In this case,
perform re-pairing by using the RC Pairing Button on the aircraft
(see 2.2.1 Functional Description on page 7 for more information).