User's Manual

To remove the battery

1. Make sure the battery is powered off before removal.

2. Press and hold the top and bottom tabs on the battery,

and pull it out slowly.

3.1.5 Mounting the Camera

In the case when the purchased gimbal set does not come with a

camera. The camera needs to be mounted manually by the user

before flight.

To mount the camera

1. Align and connect the Mini USB Port on the camera to

the Camera Connector on the gimbal.

2. Align the upper and lower screw holes of the Camera

Securing Bracket to the corresponding holes on the

gimbal mount.

3. Fasten the securing bracket to the gimbal mount by

screwing up the screws supplied, through the aligned

holes (Figure 3-4).

NOTE:

Use only cameras authorized or specified by Maxaero

which are compatible with the gimbal.