User's Manual

28
Replace the Gimbal Lock to protect the gimbal from accidental
rotation to avoid damage when not in use.
3.1.2 Installing Propellers
IMPORTANT: Do not power up the aircraft while installing or
removing the propellers. Use only authorized propellers.
It is recommended to wear protective gloves when assembling
and removing the propellers.
On each of the propellers there are one Lock icon and one Unlock
icon with an arrow icon indicating the rotate direction to fasten or
unfasten the propellers.
Name Icon Description
Lock Icon
Fasten the propeller by rotating the propeller in
the indicated direction.
Unlock
Icon
Unfasten the propeller by rotating the propeller
in the indicated direction.
¾ To install the propellers
1. Remove the warning cards from motors after reading.
Do not power up the aircraft.
2. Match two of the propellers with red nuts to the
corresponding motors with red paint, and the other two
with black or gray nuts to the unpainted motors.
3. Fasten the propeller by rotating in the direction indicated
by the Lock Icon.
¾ To remove the propellers
1. Power off the aircraft.
2. Unfasten the propeller by rotating in the direction
indicated by the Unlock Icon.