User's Manual

27
Chapter 3 Pre/Post-flight Operations
The X-Star features the user-friendly design that requires very simple
assembly to get the aircraft ready to fly. However, it is essential to read and
follow all the instructions and warnings in this manual, prior to assembly,
setup or use, in order to operate correctly and avoid damages or injuries.
IMPORTANT: Do not use with incompatible components or alter this product
in any way inconsistent with this manual, failure to operate this product in a
safe and responsible manner could result in injury or damage.
3.1 Preparing Aircraft
Follow the instructions in this section to prepare the Aircraft for flight.
3.1.1 Removing Gimbal Lock
Remove the Gimbal Lock before powering up the Aircraft to avoid
damage. Pull out the attached gimbal lock carefully as illustrated
below (Figure 3-1):
Figure 3-1 Removing the Gimbal Lock