User's Manual

Diagnostics Operations Operations
49
Adaptation Operation
Figure 4-15 Sample Adaptation Operation Screen
The main section of the Adaptation Operation screen displays a list of
operational and vehicle status information, which mainly consists of four parts:
1. The first part in the top line shows the description of the operation being
performed, and the execution status is displayed on the right, such as
Completed, Aborted, or Finished, etc,.
2. The second part shows the preconditions or requirements for executing
the operation being selected.
3. The third part displays the current conditions of the vehicle control module
being learned for comparison to the preconditions suggested by the
second part. If the current condition of the control module is out of the
suggested limit value, you must adjust the vehicle condition to meet the
requirement.
The last part displays the instruction of how to use the functional button at the
lower right corner of the screen to manipulate the teach-in operations.
Read the information carefully and check the vehicle condition accordingly,
when you are sure that the vehicle is ready to be reprogrammed, simply follow
the instruction provided to make appropriate selections. When the operation is
done, an execution status message such as Completed, Finished or
Successful, displays.
Tap the ESC button to exit the function.