User's Manual

Diagnostics Operations Vehicle Identification
27
A. Step-by-step Vehicle Selection
This mode of vehicle selection is menu driven; you simply follow the screen
prompts and make a series of choices. Each selection you make advances
you to the next screen. A Back button at the lower right corner of the screen
returns you to the previous screen. Exact procedures may vary somewhat by
various vehicles being serviced.
B. Manual Vehicle Entry
This mode allows you to manually enter and save specific vehicle information,
such as PCM Part Number, Vehicle Calibration Number Tear Tag, or VIN
number. This function enables direct access to the vehicle's ECM and saves
your time of doing step-by-step entry selections.
 To perform Manual Vehicle Entry - take Ford for example
1. Tap the Diagnostics application button from the MaxiSys Job Menu.
The Vehicle Menu displays. (Figure 4-2)
2. Tap the USA or the All button on the top toolbar.
3. Select the Ford button from the vehicle menu.
4. Select Manual Vehicle Entry from the Vehicle Selection Menu.
(Figure 4-5) A series of information screen displays, tap Yes to
continue.
Figure 4-5 Sample Vehicle Selection Menu