User's Manual

14
Chapter 3 Getting Started
Make sure the MaxiSys
TM
Display Tablet has a charged battery or is connected to the
DC power supply (see 2.1.2 Power Sources on page 5).
3.1 Powering Up
Press the Power Button on the top right side of the Display Tablet to switch the
unit on. The system boots up, and shows the lock screen. Press and drag the
inner ring to the edge of the circle to unlock the screen; the MaxiSys Job Menu
is shown.
Figure 3-1 Sample MaxiSys Job Menu
1. Application Buttons
2. Locator and Navigation Buttons
3. Status Icons
NOTE: The screen is locked by default when you first turn on the display tablet.
It is recommended to lock the screen to protect information in the system and
reduce battery usage.
Almost all operations on the display tablet are controlled through the touch
screen. The touch screen navigation is menu driven, which allows you to
quickly locate the test procedure, or data that you need through a series of
choices and questions. Detailed descriptions of the menu structures are found
in the chapters for the various applications.