User's Manual

Introduction VCI – J2534 ECU Programming Device
10
2.3.2 Power Sources
The J2534 programming device can receive power from both of the following
sources:
 Vehicle Power
 AC/DC Power Supply
Vehicle Power
The J2534 programming device operates on 12-volt vehicle power, which it
receives through the vehicle data connection port. The device powers on
whenever it is connected to an OBD II/EOBD compliant data link connector
(DLC). For non OBD II/EOBD compliant vehicles, the device can be powered
from a cigarette lighter or other suitable power port on the test vehicle using
the auxiliary power cable.
AC/DC Power Supply
The J2534 programming device can be powered from a wall socket using the
AC/DC power adapter.
2.3.3 Technical Specifications
Item
Description
Communications
 Ethernet: RJ45 Ethernet connection
 Bluetooth
 USB 2.0
Input Voltage Range
6 VDC to 26 VDC
Supply Current
300 mA @ 6 VDC
200 mA @ 12 VDC
110 mA @ 24 VDC
Operating Temperature
0°C to +60°C (ambient)
Storage Temperature
-65°C to +100°C (ambient)
Dimensions (L x W x H)
183.8mm (7.23”) x 135.5mm (5.33”) x 41mm
(1.6”)
Weight
0.54 kg (1.20 lb)
NOTE: For additional information please refer to the accompanied user
manual for the J2534 ECU Programming Device.