User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Read DTCs
- 5 Clear DTCs
- 6 Repair Reports
- 7 Smog Check
- 8 Mode 6
- 9 Freeze Frame
- 10 Vehicle Info
- 11 MIL Status
- 12 Live Data
- 13 Me
- 14 Product Troubleshooting
- 15 Compliance Information
- 16 Warranty and Service
3
2 General Introduction
The wireless diagnostic interface MaxiAP AP100 is a small interface box
used to connect to a vehicle’s diagnostic connector (DLC) and connect
wirelessly with the iOS or Android devices for vehicle data transmission,
making your iOS or Android devices (hereinafter referred to as device or
devices) into a powerful diagnostic tool.
The MaxiAP AP100 package comes with a Bluetooth OBDII connector and
a free app, through which you can monitor the powertrain to ensure the
performance of your vehicle. It is the perfect DIY tool for customers looking
for easy and fast OBDII diagnostic functions. It can work on 1996 and newer
European, Asian, and U.S. OBDII/EOBD compatible vehicles.
Functional Description
1. Vehicle Data Connector (16-pin) – connects the MaxiAP AP100 to the
vehicle’s 16-pin DLC directly.
2. Power LED – indicates system status.
The power LED displays green, blue, red depending on power level and
operating state.
A. Green
Lights solid green when the MaxiAP AP100 is plugged in and not
Figure 2-1 Product View