User's Manual

13
7 Smog Check
This function is used to check the readiness of the monitoring system. It is
an excellent function to use prior to having a vehicle inspected for state
emissions compliance. The AP100 can tell you if you are ready for your test,
if you will fail your test, or if you may fail your test.
Launch the MaxiAP app and tap Smog Check to scan the inspection and
maintenance monitors and display the results with two sub menus:
 Since DTCs Cleared – displays the status of monitors since the last
time the DTCs are erased.
 This Driving Cycle – displays the status of monitors since the
beginning of the current drive cycle.
Tap the button to view the explanation of the different indicators in front
of each monitoring system.
Figure 7-1 Sample Smog Check Screen