User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Read DTCs
- 5 Clear DTCs
- 6 Repair Reports
- 7 Smog Check
- 8 Mode 6
- 9 Freeze Frame
- 10 Vehicle Info
- 11 MIL Status
- 12 Live Data
- 13 Me
- 14 Product Troubleshooting
- 15 Compliance Information
- 16 Warranty and Service
7
5. VCI Connection
Tap Me>VCI Management or the VCI button on the top left of the Home
screen to enter the VCI Management screen. Tap the Bluetooth name
of the MaxiAP AP100 and pair up with the device. The Bluetooth name
starts with AP followed by the MaxiAP AP100’s serial number.
Turn on the device’s Bluetooth beforehand for connection.
When the device is successfully paired up and communicating with
the MaxiAP AP100, the LED on the MaxiAP AP100 lights solid blue.
Tap Done on the VCI Management screen to return to Home
screen.
6. Tap Me>Settings>Device Activate in the app to activate the device.
7. Your MaxiAP AP100 is now ready to work.
① Dynamic Rotation Banner – information about other popular Autel
products, tap the picture to visit the product page on Autel websites,
www.autel.com or www.maxitpms.com.
② Application Buttons
Figure 3-1 Sample MaxiAP Job Menu