User's Manual

40
4. Select Copy by Activation, insert the correct MX-Sensor into the sensor slot, and
then press the Y button to start programming the retrieved sensor information to the
MX-Sensor.
Figure 5-22 Sample Copy by Acitivation Screen
For program one by one, if you had successfully performed both the Read IDs from
Vehicle function and the Activation function, the screen may show as below. You can
choose either Copy by Activation or Copy by OBD even the IDs are not matched.
Figure 5-23 Sample Sensor Status Screen
Once programmed with Copy by Activation or Copy by OBD, the MX-Sensor can be
installed in the wheel directly to be mounted on the car and the TPMS warning light will
turn off without needing to write IDs to the vehicle.
Program in One Operation
1. From the activation screen, press the TEST button to trigger the original sensor.
When the information is retrieved, a series of beep sound will be heard and the
sensor information will display (Figure 5-21).
2. Select MX-Sensor icon and press Y button, select Multiple Sensors on the TPMS
Status screen, and then select Copy by Activation on the next screen.
3. The TPMS tool will automatically generate sensor IDs based on the retrieved
original sensor ID. Select the IDs you want to program with.