User's Manual

39
2. The select Multiple Sensors function to program up to 20 MX-Sensors in one
operation. The TPMS tool will automatically generate sensor IDs based on the
retrieved sensor ID. Select the IDs you want to program with.
3. When the programming is completed, the newly programmed MX-Sensors should
be relearned by the vehicle that the sensors to be mounted on.
Copy by Activation
This function allows user to bypass OBD II and automatically write in the retrieved
original sensor data to the MX-Sensor. It is used after the original sensor is triggered.
Program One by One
1. From the activation screen, select the specific wheel position and press the TEST
button to trigger the original sensor. When the information is retrieved, a series of
beep sound will be heard.
Figure 5-20 Sample Sensor Test Screen
2. Select MX-Sensor icon and a trigger mark will appear on the right side of the
screen.
Figure 5-21 Sample Triggered Sensor Screen
3. Use the UP/DOWN scroll button to select the corresponding wheel, press the Y
button.