User's Manual

37
Figure 5-16 Sample Confirmation Screen
5. Insert the correct MX-Sensor and press the Y button to start programming or the N
button to exit.
Program in One Operation
1. Follow the steps in Auto Create to select MX-Sensor icon and then select Multiple
Sensors and press the Y button.
2. Use the UP/DOWN scroll button to select Manual Create and press the Y button.
3. Place the MX-Sensors to be programmed in one operation near the sensor slot, the
tool will automatically recognize the number of the MX-Sensors. Follow the steps
3-5 in Program one by one to manually create an ID for each sensor.
NOTE
1. Different sensor from manufacturer may have different ID character length limit.
The scan tool will automatically recognize the OEM sensor ID character length, and
prompt a message when entered character length is out of limitation.
Figure 5-17 Sample Input Overflow Screen
2. If a random ID is entered, please perform TPMS Relearn function after
programming is finished. If the original ID is entered, then there is no need to
perform Relearn function.