User's Manual

35
Figure 5-12 Sample Error Screen
6. Press OK to return to the previous screen, and a sensor mark will appear on the
right side of the screen, indicating the wheel sensor has been programmed.
Figure 5-13 Sample Programmed Sensor Screen
Program in One Operation
1. Use the UP/DOWN scroll button to select MX-Sensor on the lower right corner.
2. Use the UP/DOWN scroll button to select Multiple Sensors.
3. Place the correct MX-Sensors near the sensor slot, then select Auto Create to
program up to 20 MX-Sensors in one operation.
After all required MX-Sensors are programmed, please select OBD II Relearn on TPMS
Diagnostic screen to write IDs to vehicle, and refer to TPMS Relearn for details.
Manual Create
This function allows user to manually enter sensor IDs. Users can enter the random ID
or the original sensor ID, if it’s available.
NOTE
Do not enter the same ID for each sensor.