User's Manual

27
Figure 4-25 Sample Read Codes Screen
TIPS
The saved DTC and sensor data can be reviewed in Review Data, which supports easy
data playback and printing.
Erase Codes
1. From TPMS Diagnostic Menu, use the UP/DOWN scroll button to select Erase
Codes, and press the Y button (Figure 4-19).
2. The tool will display a warning message for your confirmation. Press the Y button to
continue, or N button to exit.
Figure 4-26 Sample Erase Codes Screen
3. If the erase command is sent successfully, the screen will show as below. Press
any button to continue. To make sure codes are erased clearly, run Read Codes
again.