User's Manual

19
Table 4-1 Possible Results for Testing
Icon
Test Results
Description
√
Successful
Sensor Read
TPMS sensor is successfully activated and decoded.
The tool displays the sensor information.
x
Failed Sensor
Read
If the search period expires and no sensor is
activated or decoded, it may be caused by wrong
sensor fitting or non-functioning sensor. The tool then
displays a message “No sensor detected.”
In this case, repeat testing to confirm the TPMS
failure.
x
Wrong Sensor
Type
A TPMS sensor is activated and decoded, but does
not match the protocol for the Make, Model or Year
that the tool was set-up for. The tool displays a
message “Sensor triggered but cannot be known.”
In this case, verify the Make, Model or Year or other
features you have selected as well as the sensor part
number that was fitted.
D
Duplicate ID
A sensor with a duplicate ID has been read. The tool
displays a message “Sensor ID Duplicated.”.
In this case, clear data and re-read again.
NOTE
With Ford sensors, the tool should be held 180 degree away from the stem. Please refer
to vehicle user’s manual.
 If the TPMS sensor requires a magnet, place the magnet over the stem and then
place the tool alongside the stem, and press TEST button.