User's Manual

2. Connect the device and the power source with the USB cable adapter.

For optimum performance, always keep your tool sufficiently charged. It is

recommended that you charge the tool for over 2 hours before the first use.

NOTE

Only use the USB cable adapter that is included in our pack to charge this tool. The use

of un-approved power supplies may damage your tool and void the tool warranty.

Power Up by DLC

The tool can also be powered via the vehicle Data Link Connector (DLC). Just follow the

steps below to turn on the TPMS tool:

1. Connect the OBD II Cable to the TPMS tool.

2. Find DLC on vehicle.

TIPS

A plastic DLC cover may be found for some vehicles and you need to remove it before

plugging the OBD II cable.

1. Plug OBD II cable to the vehicle’s DLC.

2. Power up the TPMS tool by pressing the Power button, and wait for the Main

Menu to appear.

Figure 3-2 Sample Main Menu Screen

NOTE

OBD II connection does not support battery charging.

System Setting

The tool allows you to make the following adjustments and settings.

1. Language: Selects the desired language.

2. ID Format: Sets the ID displaying in Hexadecimal or Decimal.