User's Manual

8
Driver Setup
In order for the Wireless Diagnostic Interface device to operate correctly with
the diagnostic applications on the PC, you will need to first install the device’s
driver onto the PC that controls the device.
The program package requires Windows XP, Windows 7 (32-bit or 64-bit), or
Windows 8 (32-bit or 64-bit), or Windows 10 (32-bit or 64-bit)
IMPORTANT: Do not plug the interface device onto the PC until you have
installed the driver program.
The following steps may vary depending on the operating system or
components that are installed on your computer, but in general this is the
standard installation process.
1 Insert the CD that came with the MaxiSys tool kit into the CD/DVD slot of
the PC and open the CD folder.
2 Double click on “Autel Run.exe” item.
3 Click the Wireless Diagnostic Interface icon in the MaxiSys PC Suite
screen.
4 Select the installation language and the driver installation wizard will load
momentarily.
5 Follow the wizard instructions on the screen and click “Next” to continue.