User's Manual

65
tap Automatic Selection or Manual Selection to acquire vehicle VIN
information and tap Yes to confirm.
3. Tap the service you want in the SAS function list, the list may vary for
different vehicles being tested (Figure 5.1). In the following
Steering Angle Sensor Calibration
This function allows users to perform steering angle sensor calibration, clear
records and clear counter. The function options vary with the vehicles being
tested.
1) Tap Steering Angle Sensor Calibration from the SAS function menu
to enter the function screen.
2) Follow the on-screen instructions to set the ignition on/off as guided. The
vehicle battery voltage signal should be in the range 12.5 – 13.5 volts to
proceed this service, otherwise the scan tablet will display a warning
message.
Figure 5-18 Sample SAS Function Menu