User's Manual

31
Auto Scan
The Auto Scan function performs a comprehensive scanning over all the
systems on the vehicle’s ECU in order to locate fault systems and retrieve
DTCs. The sample operation interface of Auto Scan displays as below:
1. Navigation Bar
2. Main Section
3. Functional Buttons
 Navigation Bar
1. List Tab – displays the scanned data in list format.
2. Progress Bar – indicates the test progress.
 Main Section
A. List Tab
Column 1 - displays the system numbers.
Column 2 - displays the scanned systems.
Column 3 - displays the diagnostic marks indicating different
conditions of the test result:
-!-: Indicates that the scanned system may not support the
code reading function, or there is a communication error
between the tester and the control system.
Figure 4-9 Sample Auto Scan Operation Screen