User's Manual

6
1) USB Port
The USB port provides the easiest connection between the
device and the MaxiSys Display Tablet/PC via a USB cable.
2.4 Power Up
The Pass-Thru vehicle reprogramming device can be powered either
via the vehicle DLC, or the external power adapter.
 Vehicle Power Supply
1) Connect the MVCI – OBDII cable to the reprogramming tool.
2) Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you
need to remove it before plugging the OBDII cable.
3) Plug OBDII cable to the vehicle’s DLC.
4) Wait for the reprogramming tool to power up.
 External DC Power Supply
1) Locate the power port of the device.
2) Connect the device and the power source with the power
adapter.
3) Wait for the reprogramming tool to power up.
NOTE: The external power supply does not support power
charging to the vehicle battery.