User's Manual

5
2.2 Top Panel
Connections to the power adapter and vehicle are available on the
top panel.
1) Power Port
The power port (DC 12V) connects the device and the power
source with the adapter, which supplies power to the
reprogramming tool.
2) Vehicle Connector
The Vehicle connector connects the device to the vehicle’s DLC
via a standard high density DB-26 MVCI – OBDII cable.
2.3 Bottom Panel
The MaxiFlash
®
Elite Pass-Thru device supports two ways of PC
connection: USB and wireless BT, which make PC communication
and vehicle reprogramming all the more convenient and easy for
technicians.
The embedded wireless BT module, which offers higher bandwidth
and distance range, can be detected and paired to Autel’s MaxiSys
diagnostic tablet and serves as a Vehicle Communication Interface
(VCI) device for data transmission. The USB connection port to the
PC is available in the bottom panel of the device.