User's Manual

7) When the driver is successfully installed, a confirm window

will appear. Click on “Finish” to complete the whole

installation procedure.

3.2 Firmware Update

This function allows you to update the driver software for the

Pass-Thru device through the PC. Make sure the PC is connected

to the Internet before using this function.

1) Power up the device by the external power supply; verify the

green Power LED on the front panel is on.

2) Connect the Pass-Thru device to the PC with the supplied USB

cable; verify the green Connection LED on the front panel is

on.

3) From Windows Start Menu, find and double click the

“MaxiFlash Elite” icon, wait for the program interface to pop

up.