Instructions / Assembly

38
“OK” -- Indicates that a particular monitor being checked
has completed its diagnostic testing.
“INC” -- Indicates that a particular monitor being checked
has not completed its diagnostic testing.
“N/A” -- The monitor is not supported on the vehicle.
The LED and audio tone indications are as interpreted below:
LED Interpretation
The green and red LEDs provide an easy way to check if
emission-related monitoring systems complete their self-diagnostic
testing.
1) GREEN LED – Indicates that engine systems are “OK” and
operating normally (the number of Monitors supported by the
vehicle which have run and performed their self-diagnostic
testing is in the allowed limit).
2) RED LED – Indicates that the number of Monitors supported by
the vehicle which have run and performed their self-diagnostic
testing is out of the allowed limit.
Audio Tone Interpretation
The audio tone could be configured according to the I/M Readiness
Status. This function is invaluable when working in bright areas where
LED illumination alone is not sufficient.
LED Light
Audio Tone
Beep Interval
Green LED
Two long beeps
2 min
Red LED
Beep OFF