Instructions / Assembly

30
 If you do not want to proceed with erasing codes, use
SCROLL button to select NO to exit. A message of
“Command Cancelled!” show ups. Wait a few seconds or
press any key to return to Diagnostic Menu.
3) Press the ENTER button to confirm.
 If the codes are cleared successfully, an “Erase Done!”
confirmation message shows on the display.
Figure 4.8
 If the codes are not cleared, then an “Erase Failure. Turn
Key on with Engine off!” message appears.
Figure 4.9
4.3 Viewing Freeze Frame Data
Freeze Frame Data allows the technician to view the vehicle‟s
operating parameters at the moment a DTC (Diagnostic Trouble Code)
is detected. For example, the parameters may include engine speed
(RPM), engine coolant temperature (ECT), or vehicle speed sensor
Erase Codes
Erase Failure.
Turn Key on with
Engine Off!
Press any key to con.
Erase Codes
Erase Done!
Press any key to con.