Instructions / Assembly

29
 If the manufacturer of your vehicle is not listed, use the
SCROLL button to select Other and press the ENTER
button.
5) Select Previous Menu from the Read Codes screen, and press
ENTER button to return to previous menu.
4.2 Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the
scan tool to delete not only the codes from the vehicle’s on-board
computer, but also “Freeze Frame” data and manufacturer specific
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do
not erase the codes before the system has been checked completely
by a technician.
NOTE: Erasing codes does not mean that trouble codes in ECU
have been eliminated completely. As long as there is fault with the
vehicle, the trouble codes keeps on presenting.
 This function is performed with key on engine off (KOEO). Do
not start the engine.
1) Use the SCROLL button to select Erase Codes from
Diagnostics Menu and press the ENTER button. (Figure 4.3)
2) A warning message comes up asking for your confirmation.
Figure 4.7
Erase Codes
Erase trouble codes!
Are you sure?
YES NO