Instructions / Assembly

NOTE: Permanent Codes function is available for merely

vehicles supporting the CAN protocols.

3) View DTCs and their definitions on screen. Press ENTER button

to return to previous screen.

Figure 4.5

 The control module number, sequence of the DTCs, total

number of codes detected and type of codes (Generic or

Manufacturer specific, Stored or Pending codes) will be

observed on the upper right hand corner of the display.

4) If more than one DTC is found, use the SCROLL button to

check all the codes.

 If retrieved DTCs contain any manufacturer specific or

enhanced codes, a “Manufacturer specific codes are found!

Press any key to select vehicle make!” message comes up

prompting you to select vehicle manufacturer to view DTC

definitions. Use SCROLL button to select manufacturer and

then press ENTER button to confirm.

Figure 4.6

1/1

P1633 $10 BUICK

Ignition 0 Switch Circuit

Vehicle Manufacturer 1/28

BUICK

BMW

CADILLAC

CHEVROLET

CHRYSLER

FORD