Instructions / Assembly

27
 Pending Codes are also referred to as “maturing codes” or
“continuous monitor codes”. They indicate problems that the
control module has detected during the current or last driving
cycle but are not considered serious yet. Pending Codes will not
turn on the malfunction indicator lamp (MIL). If the fault does
not occur within a certain number of warm-up cycles, the code
clears from memory.
1) Use SCROLL button to select Read Codes from Diagnostic
Menu and press ENTER button.
Figure 4.3
2) Use the SCROLL button to select Stored Codes or Pending
Codes from the Read Codes menu and press the ENTER button.
Figure 4.4
 If there is not any Diagnostic Trouble Code, the display
indicates “No (pending) codes are stored in the module!”
Wait a few seconds or press any key to return to previous
screen.
Diagnostic Menu 1/7
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info
Read Codes 1/4
Stored Codes
Pending Codes
Permanent Codes
Previous Menu