Instructions / Assembly

16
In this menu, you could configure the number of monitors to pass
diagnosis, and restore the default settings.
1) Allowed INC Monitors
From Configure Monitors screen, use the SCROLL button to select
Allowed INC Monitors, and press the ENTER button.
Emissions tests vary depending on the geographic or regional area in
which the vehicle is registered. So the scan tool provides a more
flexible way to meet different standards, which allows the user to
select 0, 1, 2, 3 „not complete‟ monitors in test.
2) Reset Factory Default
From Configure Monitors screen, use the SCROLL button to select
Reset Factory Default, and press the ENTER button.
It will restore the default configuration settings, which are compatible
with most vehicle inspection programs, but it will also delete any
customized settings.
The tool will display an information message to ask for your
confirmation. Select Yes to proceed and No to exit without change.
Unit of Measure
 Metric is the default measurement unit.
1) From System Setup screen, use the SCROLL button to select
Unit of Measure and press the ENTER button.
2) From Unit of Measure screen, use the SCROLL button to select
the desired unit of measurement. (Figure 3.6 )