Use and Care Manual

55
5) From On-Board Mon. Test menu, use the UP/DOWN scroll
button to select a test to view and press the OK button. Or, use
the LEFT/RIGHT scroll button to view previous/next screen of
test items.
 If the vehicle under test does not support the mode, an
advisory message will be displayed on the screen.
Figure 5.41
 For CAN-equipped vehicles, test selections can be as below:
Figure 5.42
6) Use the UP/DOWN scroll button to select the desired monitor
from On-Board Mon. Test menu and press the OK button.
7) View test data on screen.
On-Board Mon. Test 1/31..
O2 Mon. B1S1
O2 Mon. B1S2
O2 Mon. B1S3 ?
O2 Mon. B1S4
O2 Mon. B2S1
O2 Mon. B2S2
On-Board Mon. Test
The selected mode is
not supported
Press any key to con..