Use and Care Manual

3) Double press ESC to return to previous menu.

C. LED Test

The LED Test function verifies if the I/M Readiness LED indicator

lamps are functioning properly.

1) Use the UP/DOWN scroll button to select LED Test from the

Tool Self-test menu, and then press the OK button.

Figure 3.12

2) Three LED lamps will be flickering in turn at different

frequencies.

3) Press any key to exit and return to previous menu.

Update Mode

This function allows you to update the scan tool software and DTC

library through a computer.

 To update your scan tool, you need the following items.

AutoLink AL519

A PC or laptop with USB ports

A USB cable

1) Download the programs to be updated to your computer.

2) Run the MaxiLink Tool Kit in your computer. (Figure 3.13)

LED Test

LED Test….

Press any key to exit.